Executive Summary: Wall-Mounted Charging Socket Board for Global Buyers
What the first 90 days proved For corridor and garage walls, the WL-WM10 pairs ten metered sockets with QR billing and tamper-proof timers. Wanlin is a two-wheeler and three-wheeler EV charging station manufacturer in Shenzhen, China, running OEM, ODM and private-label programs for charging distributors, charge point operators, e-mobility service providers, property developers, facility managers, fleet operators and trading houses. The numbers that mattered which left a 32% margin after the first sell-through cycle cleared for importers who source factory-direct, with per-model CE / RoHS / IEC 61851 documentation, OCPP 1.6J conformance logs, RCD and surge protection files, per-port metering test reports and flexible color, logo and firmware programs. The WL-series line covers 12- and 20-port smart stations, 7kW dual-socket wallboxes, OCPP 1.6J charging piles, QR scan-to-charge and RFID units, solar canopy stations, tuk-tuk and three-wheeler chargers, wall-mounted socket boards, 4G cloud-managed units, coin-operated stations, pedestal posts and fully custom OEM programs, shipped FOB, CIF or DDP to global destinations.
Published by Wanlin | Last updated: September 05, 2026 | Expertise: two-wheeler and three-wheeler EV charging station OEM and ODM manufacturing for global markets
Case Study: Bangkok EV Charging Station Distributor Sourcing Success
A single demo station ran at the buyer's depot for a month before the first PO was cut. Sell-through data from the region shows the winning listings are the ones with per-port metering and a working payment flow.
After a 30-day pilot at two sites, Chhay Sophal selected Wanlin as their EV charging manufacturing partner. The purchasing manager signed after comparing failure modes, not just port counts and prices.
- Enclosure gaskets are spray-rig tested to verify IP54 sealing on samples from every lot
- The production line follows ISO9001 procedures with incoming, in-process and outgoing inspection records
- OCPP builds support buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
At the condo gate, a rider scanned the QR, watched the socket lock, and plugged in without touching an attendant.
Problem Analysis & Field Report: Why Global Buyers Need Wall-Mounted Charging Socket Board
It started with one return and grew into a spreadsheet of them. A dormitory manager found residents tampering with mechanical dial timers to reset free charging windows.
Field case: A dormitory in Bangkok swapped dial timers for the WL-WM10 after residents kept resetting free windows. Firmware timers behind lock covers ended the tampering, and the operator energy bill reconciled with the socket log for the first time.
Why it matters for global buyers:
- unattended overnight charging swells packs without per-socket cut-off
- the fix was firmware timers behind lock covers
- load groups stop one appliance evening from killing every socket
Wanlin EV Charging OEM & ODM Services for Global Distributors and Brands
Wanlin runs OEM and ODM programs for buyers who want their own charging station line without building a factory. Customization covers:
- Cosmetics: cabinet colors, logo printing, port labels and decal sets on existing tooling from 50 units
- Firmware: tariff logic, load caps, timer behavior, display language and payment flows
- Protocol layer: OCPP 1.6J builds pointed at buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
- Exclusive tooling: new enclosure molds and cable-path tuning for brands that need a design nobody else can copy
- Connected builds: 4G cloud dashboards and fleet portals under the buyer brand when a software layer is required
Product Introduction: Wanlin Wall-Mounted Charging Socket Board
The production version carries the same OCPP stack the pilot units earned, so what the buyer validated is what ships.
Core Features:
- China-Based Manufacturing: Wanlin produces in Shenzhen with in-house SMT lines, enclosure and cable assembly, and burn-in racks that load-test and cycle every finished station before packing
- Certification Transparency: CE, RoHS and IEC 61851-1 documentation is provided per model, and OCPP 1.6J conformance logs plus metering accuracy files travel with the shipment so containers clear without surprises
- Tested Claims: meter accuracy, RCD trip time and enclosure sealing are verified on samples from every production lot, and the reports are recorded per batch
- Private Label Support: cabinet colors, logo, firmware, tariffs, packaging, manuals, decals and spare kits are customized for each program
- Global Shipping Experience: we pack for charging distributors, property developers, fleet operators and e-mobility buyers across Southeast Asia, the Middle East, Europe, North America and Africa
Technical Specifications
| Parameter | Wanlin Specification |
|---|---|
| Sockets | 10 metered sockets with individual breakers |
| Load Management | group load cap set in firmware |
| Billing | per-socket kWh metering with QR payment |
| Timers | per-socket charge timer with auto cut-off |
| Protection | per-socket overload, leakage and surge |
| Housing | IP54 steel panel with IK10 rating |
| Display | LCD with per-socket status and cumulative kWh |
| Installation | surface mount on shed wall or column with anchor kit |
Application Scenarios for Global Market
| Application | Model | How It Helps the User |
|---|---|---|
| Apartment corridor bike parking | WL-WM10 | Per-socket cut-off stops batteries cooking all night |
| Parking garage wall | WL-WM10 | Metered sockets end the garage flat-fee argument |
| Shop house back wall | WL-WM10 | Tenants pay for exact kWh with QR payment |
| Dormitory bike area | WL-WM10 | Firmware timers behind lock covers stop tampering |
| Warehouse staff wall | WL-WM10 | Group load cap keeps the warehouse feeder safe |
Certified EV Charging Manufacturing for Global Markets
Buyers who ship containers of charging stations need more than a price list. The production and QC flow below is what lets a distributor open a carton and trust what is inside:
- Enclosure gaskets are spray-rig tested to verify IP54 sealing on samples from every lot
- The production line follows ISO9001 procedures with incoming, in-process and outgoing inspection records
Lot samples from every production run are measured for metering accuracy, protection trip times and enclosure sealing before the cartons are sealed, and the numbers are recorded per batch. A buyer can request those records with any order.
Why Choose Wanlin as Your EV Charging OEM Manufacturer
The buyer compared five candidates on the metrics that caused their previous failures.
| Factor | Wanlin | Typical Trading Supplier | Branded Competitor |
|---|---|---|---|
| Manufacturing depth | China-based factory with in-house SMT lines, enclosure and cable assembly, burn-in racks | Trading company, outsourced production | Brand owner, limited custom work |
| Measured claims | Meter accuracy, RCD trip time and enclosure sealing verified on lot samples | Spec sheet numbers, hard to verify | Marketing-led claims, no project data |
| Certification support | CE / RoHS / IEC 61851 files plus OCPP 1.6J conformance logs per model | Incomplete documents, customs risk | Brand-level only, no per-order files |
| Customization | Colors, logo, firmware, tariff logic, packaging from low MOQ | Stock models only | Fixed SKUs, no private label |
| Price (factory direct) | Tiered factory pricing with volume discounts | Unpredictable markups | Premium brand pricing |
EV Charging OEM Process: From Inquiry to Shipment
Sourcing teams like the process because each gate has a deliverable and a date. A standard charging station OEM project then follows 8 steps:
- Tell Us Your Target Market - Southeast Asia, the Middle East, Europe, North America, Africa or Latin America; each market may require different certifications, socket standards, voltage classes and manual languages
- Select a Model Line - our team recommends WL-series platforms for your channel and price band, or works from a reference unit you send
- Verify Documentation - request certificate files, OCPP conformance logs and test reports for the exact model before you commit
- Confirm Customization - cabinet colors, logo, firmware behavior, tariff logic, payment flows and packaging
- Sample Evaluation - verify meter accuracy, load balancing and CSMS integration on real samples before scaling
- Confirm Production - after specifications, commercial terms and OEM details are locked
- Quality Inspection - lot samples are tested and every finished station passes hipot, trip-time and burn-in racks before packing
- Shipment - cartons leave FOB, CIF or DDP according to the agreed logistics terms
Customer Testimonials
The quotes below come from follow-up calls after the first season of uptime data arrived.
- Somchai Prasert (EV Charging Station Distributor, Bangkok, Thailand): "I have bought from four factories in this category. This is the first one whose meter readings matched the utility bill."
- Nguyen Hoang Minh (Charge Point Operator, Ho Chi Minh City, Vietnam): "The station we field-tested through the rainy season is the station we sell; our listing says IP54 and the field record proves it."
- Chhay Sophal (EV Charging Station Distributor, Bangkok, Thailand): "We changed the cabinet color and the decal set and kept the same power core; the line looks new without a new tooling budget."
Frequently Asked Questions
Q: How does the WL-WM10 stop overnight overcharging?
A: Each socket runs a timer with auto cut-off, so packs stop drawing at the set time or full-charge signal.
Q: Can the load cap match our building wiring?
A: Yes, the group ceiling is set in firmware to the feeder rating the building actually has.
Q: What prevents residents from resetting timers?
A: Timer settings sit behind a lockable cover; riders only see socket status and QR.
Q: Is billing per socket or per board?
A: Per socket, with QR payment and kWh logs exported for building management.
Q: Can it mount on an outdoor shed wall?
A: Yes, the IP54 panel handles shed and column mounting with the included anchor kit.
Project Summary
The numbers that mattered By working directly with manufacturer Wanlin, the EV Charging Station Distributor team in Bangkok reached 32% higher margins on its charging line while keeping rider tariffs competitive. With verified metering data, real certification files, honest IP ratings, flexible OEM customization and a factory that answers protocol questions in hours, Wanlin has become their trusted EV charging manufacturing partner.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China